galvanised kennels

does anybody in the US carry these? All the ones I find would need to be shipped in from the UK.

Like these...
http://www.canineproducts.co.uk/professional-pro-kennel-bar-dog-runs-108-c.asp

 

thats about $800usd.
try your local welding shop, they should be able to make something like that to suit your needs

 

Yes, Options Plus here in the U.S. has them.

http://www.optionspluskennels.com/

However, I wouldn't bother spending my money on a kenel like that. I bought several like the ones you pictured & they were as worthless as two pinches of owl dung. I bought several & they've all been chewed through. I wrote Options Plus & complained after the first time one of my dogs chewed out of ones that you pictured in less than 5 minutes. Options Plus kindly sent me a new "heavy duty" one for free, but they chewed holes in that too. In short, they destroyed both products. It just took longer to destroy the heavy duty one.

I would go with the super heavy duty brown powder coated welded ones you can get at Tractor Supply. They're about $500-$600 & they're so sturdy no dog can chew holes in it.

Hope this helps.

Blessings ...

 

Like rally said you could check with a local welder.My buddy made some out of #4 rebar,but he made it like a grid.Completely bulldog proof.Only down fall is it was real heavy.

 

Those were the ones I was going to recommend also.

 

thanks ABK and Boogie I look into the those!

 

These?

Tarter Heavy-Duty Welded Wire Kennel, 10 ft. W x 10 ft. L x 6 ft. H - 3606740 | Tractor Supply Company

 

I can't tell from the pics of those are the right ones or not. The ones I've seen were brown, not grey in color & the welded wire is thick.

Blessings ...

 

4 gauge wire is thick, just over .200" ( about 3/16")

 

I have three powder coated ones from Tractor Supply and they aren't exactly as strong as they are advertised. For normal dogs, these are great but for destructive/hard keepers these are not the best. The welds are not strong enough and my dog have actually busted the paneling away from the support beams in many spots.

Your best bet is to pay a couple more dollars and order them from Priefert. I ordered my tops from them and they are of the highest quality and alot stronger.

http://www.priefert.com/products/Kennels--Accessories_51/Priefert-Kennels_516/all/

Good Luck.

 

looked at a few such type runs at crufts , found the welding worthless birdshit type , and the galvanising thin to patchy not to mention the bars wernt worth a wxxk,
best find a tradesman local to you n have it made to measure
edited to say was not refering to above post , only the coyboys in the uk

 

We must not have been looking at the same ones. The ones I saw I laid my hands on. They were 10 x 10 x 6, were brown in color with very good welds & very thick wire. The ones I saw a dog would bust their teeth on before they broke the welds or bent the wire. But I saw these a few years ago, TS may not carry them any more. If I could have, I would have bought a whole boat load of them. But instead I went with Options Plus & regretted it ever since.

Blessings ...

 

loews sells magnums lower end brand same gauge as the magnum not as flashy and only 5 ft tall. I make lids on mine so it dont matter only $350.